Not able to load one particular website-Example Tinypic.com, Imageshak

The Explanation:
Your problem is that TinyPic can't handle higher MTU settings.
Most NICs have their MTU set at 1500 or higher, depending on whether Jumbo Frames are enabled.

The Solution:
  • Set your MTU slightly below the default. I recommend 1404, as that seems to give the best performance per stability, and ensures that TinyPic will load.
  • Disable Jumbo Frames
Here's how you do it:
 
Open a command prompt and paste the following command:
netsh interface ipv4 set subinterface "Local Area Connection" mtu=1404 store=persistent


To check to see if the settings were changed, try this command:
netsh interface ipv4 show subinterfaces

NOTE: If the network you're having issues with does not show "1404" in the left column, change "Local Area Connection" to the correct name of the network and try again. 

No comments:

Post a Comment